X-Charger B6 Multi-function Balance Charger 
$69.00 with Free Shipping !
The X-Charger Balance Charger is designed with the avid RC enthusiast in mind, and will charge 1 to 6 cell Lipo batteries, 1 to 15 cell NiMh/NiCd batteries and 2 to 20 volt lead acid batteries. The X-Charger with Blue Backlit LCD display :
Displays the charge rate in Mah
Voltage in Each cell (Real Time during Charge)
The charging rate is adjustable from 0.1 amp to a maximum of 5.0 amps, so it will charge your large batteries in a reasonable time.
The X-Charger is fully programmable, has several built-in safety features, like maxium chage time and Storage conditioning for lipo's what a great charger and comes with adapter cords for connecting to several types of battery power leads. see pictures above
To provide power to the charger, simply use the alligator clips to connect to any 11 to 15 volt power supply that provides 5 amps or more, such as an auto battery.
A 120v AC to 12v DC 5 Amp Power Supply is available for $17.00 on the accessories page.
The X-Charger charger has several programming features that must be set for charging various battery types and sizes.
This is not a TOY do observe all safety precautions provided with this battery charger before use.
X-Charger Multi-function Balance Charger Specifications:
Dimensions: 5.25 x 3 x 1 inches
Power Input: DC 11V to 15V with up to 5 amps required. Connector included
Charging Current: 0.1 amp to 5.0 amps charging Currentin 0.1 amps increments.
End of charge alarm: An alarm sounds when charging is complete.
Circuit protection: Protects the charger and battery even if the battery connection is reversed.
Battery Type: Selectable between NiMh, NiCd, Pb (lead acid), Li-On, Li-Fe, and Li-Po.
General Charging Connection: Several adapter cords with male banana connectors that plug into the charger are provided. These include the following connection types: male T-Plug, JST with female housing, and universal female servo connector for connecting receiver battery packs. The general charging connection allows you to charge 1 to 15 cell NiMh/NiCd and lead acid batteries. You can also charge all 1 to 6 cell Lipo batteries by connecting to this charge lead, but you must also connect your Lipo battery to the appropriate Lipo Balance Connector Port if you wish to Balance Charge your Lipo.
Lipo Balance Connector Ports: the 5 balance Ports are for the JST/XH balance connectors with 2.5mm pin spacing.These ports allow you to balance charge 2, 3, 4, 5 and 6 cell Lipo batteries.
This balance connector is used on the following Lipos: WOW, Vampower, Hobby Loong, 3E Model, Align, BatteryHobby, Common Sense RC version 2, DualSky, Dynam, Electric Power, Esky, Fully Max, GE Power, Great Planes Electrify, Hextronic, HiModel, Horizon E-flite, Horizon Parkzone, Imax, Mega Power, Mystery, Power Up, Protek, RadicalRC, Turborix, Venom, Walkera, X-Caliber and Zippy Lipos.
The JST/XH connector is also used on Common Sense RC version 1, DN Power, and Tenergy Lipos, but the polarity is the reverse of the others listed above. You would need to reverse the polarity of the balance plug on these Lipos in order to balance charge them on the X-Charger .
