RC LIGHTING SYSTEMS

New LOW COST " LITE RC Lighting system"

Want RC Lights ? Plug in  the Lazertoyz RC LITE Controller up to your receiver just like a servo and use your R/C radio Transmitter to control the "RC LITE SYSTEM"

YES ! Switch or Joystick controllable while flying !

Turn on your lights while flying and you landing lights on final approach ..

Now how cool is that ?

With 5 LED outputs -  Control  Up to 20 or more LED'S

Completely pre-wired with 4 Ultra Bright LED's !

4 Pre-wired LED RC Lights.

    red 25,000 MCD  25 deg angle

  green 25,000 MCD 25 deg angle

  white 55,000 MCD 25 deg angle

 One each of Red & Green position lights , and 2 white LED's (1-landing and 1- strobe) !

Add more LED's  for $2.00 each. Use up to 20 LED's

Weight of 4 light V2 system is only  .3 OZ - 8 grams                      Current draw with 6 lights on solid is  0.14 amps

The difference between the V2 and the V3 is Control over the position lights.

V2 VIDEO On Gear Switch     V2 VIDEO On Joystick     V3 Video

V2 gives you control over the position lights (Red and Green) turn on off  solid and blinking along with the landing light (only one)  on and off.

V3 is control over landing lights only, the strobe blinks continuously, the position lights are on solid and you control the landing lights ( 2 of them) on and off.

Both of our RC light systems are capable of adding up to 20 lights to them. To add new lights just use the same color light and connect it in parallel (Yellow wire to Yellow and White to White)

Click for Full  V2 RC LITE SYSTEM Lighting data Sheet

                                                  Blade CX with V3 Kit and lights in clear straws on the landing gear, landing lights in the body, strobe on tail

NEW V3 Kit allows for simple operation (strobe, position lights, are on all the time, the landing lights can be turned on and off in flight)

 Works Just like the V2 Kit Just Plugs in to your receiver  V3 Operation Video

1 Red led 25,000 MCD  and 1 Green led 25,000 MCD Position Lights on Solid all the time

1 "3 blink Strobe" 55,000 MCD led on all the time (blinks 3 times then a pause)

2 Landing lights white led 55,000 MCD controlled by radio ( joystick or switch )

Each Light has 26" of wire -easily extended to your length viewing angle 25 deg. (Email me for a quote on a Custom Wire Lengths )E-Mail Dan

Click for Video- How to Add Lights To Our V2 or V3 Light Kits

Additional Ultra Bright LED with 26" of 30 awg Wire

 Pre-Wired and insulated to LED

  Just $2.00 each

Just add in parallel with the same color light and wire yellow to yellow and white to white- mixing colors will cause one light to be less bright than the other.

    Without Mount                                                  With Mount

New LED Mounts/Diffuser Mounts in a .25 in hole

Clear Diffusers Just .50 each

Black LED mounts  Just .50 each	30 AWG Wire -   (equal length of yellow and white) 1.00 per foot (just order as many feet as you like it will be a continuous length) $1.00 3/64 Shrink tube for 30 awg wire  $1.00

New MAXI-LIGHT KIT Limited quantities available    $29.00 each Email me for details - Lights and connectors sold separately Channel Low -100 (1ms) Center 0 (1.5ms) High +100 (2ms)   OUTPUT         1   Solid On Solid On   2     Solid On Landing   3   Solid On Solid On   4 Solid On Solid On Solid On   5   1Blink Strobe     6   1Blink (different timing than 5)   7   2 Blink Strobe     8     Solid On Landing   9     Solid On Landing   10     Solid On Landing   Each Output Channel Can be a Different Color     You can add more LED Lights on each Output (but they must be the same color)       20 lights max (more with an added BEC)  10 on each output max

Custom Configure your  lights ! Click here to buy and for Specs

How to our LED Kits and make a "Light Tube"

Get a straw that's just under 3/8 dia. (ARBY's straws work great) snap the mount without the locking ring on the led then tilt and insert in the straw . AWESOME LIGHTING ! You may insert a diffuser in the other end of the straw.. hot-glue with just a dab.